Description
Rhino's hydraulic post driver is the right choice when noise, vibration, or wet-condition operation rules out pneumatic, or when the contractor already runs hydraulic carriers on the job. The HPD-60 shares chuck adapters with both the gas Pro Series Chuck-Lok system and the pneumatic PD-55 family, so crews running multiple Rhino tools can keep one adapter inventory.
- 1,380 BPM at 8 GPM and 1,725 PSI working pressure (2,300 PSI max relief) for consistent, repeatable blow energy
- 95 Joule (~70 ft-lb) blow energy with no audible step-down between cycles as a pneumatic tool experiences
- 64 lb (68 lb with hoses) hand-held weight for direct-on-post operation in tight access and dispersed work
- Vibration under 9.6 m/s squared three-axis extends allowable trigger time under HAVS exposure rules
- Closed hydraulic system runs in wet and below-freezing conditions without the icing risk of pneumatic drivers
- 3-7/8 in. I.D. master chuck accepts PD-55 adapters and Chuck-Lok adapters from the gas Pro Series for shared inventory
- Nitrogen accumulator charged at 730 PSI and rated for ~7x the service life of competing hydraulic accumulators
- Powered by Rhino HPP-14 or HPP-18V Flex packs, or by skid steer / mini excavator / utility truck via the HFD oil flow divider
- Flat-face quick-disconnect couplers minimize oil leakage and contamination during carrier-to-carrier moves
- Crowder Supply ships the HPD-60 with master chuck, whip hoses, quick connects, and trigger valve included
