Description
The CP 0009 is a 9-14 lb-class handheld pneumatic chipping rock drill from Chicago Pneumatic's rock-drill line, used for spot drilling, light chipping, rebar trimming, and small-diameter anchor-hole work. Key specs include 3,420 BPM impact rate, 20 CFM at 90 PSI. Utility, masonry, and finish-rock crews specify the CP 0009 for the Chicago Pneumatic parts pipeline and field-service support.
- 9-14 lb-class handheld chipping pneumatic rock drill from Chicago Pneumatic's rock-drill line, built for sustained spot drilling and light chipping work.
- Rated 3,420 BPM, 10.1-14 lb tool weight, 14-3/4 in. overall length for balanced impact across production drilling and rock-bolting work.
- Consumes 20 CFM at 90 PSI through a 3/8 in. NPT air inlet, runs on standard contractor compressor circuits.
- A 50-CFM compressor supports single-tool operation; larger 185-CFM and 375-CFM units run multiple drills on the same circuit.
- Built for light chipping on concrete and masonry, spot drilling, post-blast cleanup, rebar trimming, and small-diameter anchor-bolt holes.
- Utility, masonry, and finish-rock crews specify it as the small-diameter detail tool in their truck inventory for cleanup and spot work.
- Crowder Supply stocks drill steels, bits, replacement chucks, pistons, and seal kits for the CP 0009 platform.
- Chicago Pneumatic anchors the global pneumatic-tool catalog with one of the longest-running rock-drilling and demolition lineages in the industry.
